| 009-0002CT Air Sandblast Kit Perfect for removing rust, scale and paint, or etching glass and weathering wood Includes sandblast gun, long-wearing ceramic nozzle, 10 ft. hose, pick-up tube, 1/8", 3/32" and 5/64" air jets, Allen wrench, and gasket Totally portable, no media hopper required |
| 010-0012CT Basic Spray Gun Perfect for spraying latex, primer, lacquer, stain, enamel Includes internal and external mix spray nozzles 1 quart capacity |
| 010-0013CT Heavy Duty Spray Gun Perfect for low, medium and high viscosity materials (Not recommended for auto finishing) Includes internal and external mix spray nozzles 1 quart capacity |
| 010-0014SP Commercial Spray Gun Perfect for spraying thin to medium viscosity materials that require fine atomization for a smooth finish Includes external mix spray nozzle 1 quart capacity |
| 010-0016CT Air Brush Kit Perfect for oil and water based paints, enamels and lacquers Lightweight, single action, external mix gun Adjustable spray pattern |
| 010-0035CT Gravity Feed Spray Gun Light weight plastic cup allows visibility of fluid level Screw on lid with adjustable vent Easy-to-identify laser etched knobs for air, fluid and pattern controls show the user how to control the spray pattern - laser etching will not rub off |
| 018-0059CT Air Tool Oil Lubricates tool to improve operation, extend tool life, and reduce premature wear Superior adhesion to metal surfaces Provides rust protection |
| 024-0075CT Air Hammer with 4 Chisels Perfect for cutting, chipping, piercing, scraping Includes 4 chisels (cold chisel, ripping chisel, punch and panel cutter) and chisel spring retainer 1-5/8" stroke, 5000 BPM (blows per minute) |
| 024-0076CT 3/8" Air Drill Perfect for drilling, honing, reaming, fastening Includes chuck and key 2,200 RPM |
| 024-0077CT 1/2" Air Impact Wrench 4 torque settings up to 230 ft/lbs. (230 ft/lbs., 215 ft/lbs., 195 ft/lbs., 150 ft/lbs.) 230 ft/lbs. maximum torque 1/4" NPT air inlet with screened filter keeps out unwanted particles |
| 024-0078CT 1/4" Air Die Grinder Perfect for grinding, deburring, smoothing, sharpening Includes 1/8", 1/4" collets and collet wrenches 25,000 RPM |
| 024-0079CT 3/8" Air Ratchet Wrench Perfect for removing and tightening lug nuts and bolts, engine and radiator maintenance Use with 3/8" drive impact sockets 50 ft/lbs. maximum torque |
| 024-0080CT Engine Cleaning Gun Perfect for removing dirt, grease and grime Includes 4 ft. siphon pick-up tube for use with a wide variety of solvents and degreasers 10 in. wand with easy push button operation |
| 024-0082CT Air Grease Gun Perfect for lubricating vehicles, machinery, lawn and garden equipment Uses a standard 14 oz cartridge or can be filled from bulk container 1/4" NPT air inlet with pre-installed connector |
| 024-0086CT 1/2" Drive Impact Socket Set, SAE Use with 1/2" impact wrench and 1/2" ratchet Chrome vanadium steel Fully hardened, 6 point Deep |
| 024-0087CT 1/2" Drive Impact Socket Set, Metric Use with 1/2" impact wrench and 1/2" ratchet Chrome vanadium steel Fully hardened, 6 point Deep |
| 024-0088SP 3/4" Drive Impact Socket Set, SAE Fully hardened, 6 point Use with 3/4" impact wrench Chrome vanadium steel |
| 024-0089CT Cut Off Tool Perfect for cutting mufflers, clamps, joints and bolts Includes 3" cutting disk 22,000 RPM |
| 024-0090CT Aluminum Oxide Disk Excellent for cutting sheet metal, sanding, leveling, and trimming corners Maximum safe speed 20,000 RPM Two disks per package |
| 024-0091CT High Speed Air Sander Perfect for smoothing, shaping, removing rust, sharpening Includes 3", 4.5", and 5.5" backing pads (sandpaper not included) 18,000 RPM |
| 024-0092CT 6" Dual Action Air Sander Perfect for sanding wood, metal, fiberglass and auto body filler Includes 6" sanding pad (sandpaper not included) 10,000 RPM |
| 024-0095CT Replacement Air Hammer Chisel Set |
| 024-0108CT 3/8" Butterfly Air Impact Wrench Perfect for tightening and removing bolts in small areas 75 ft/lbs. maximum torque 1/4" NPT swivel air inlet |
| 024-0132CT Jitterbug Air Sander Perfect for sanding wood, metal, fiberglass and auto body filler 3.5" x 6.5" pad uses 3-5/8" x 9" standard sandpaper (sandpaper not included) 8,000 RPM |
| 035-0009CT Lever Style Blow Gun Perfect for cleaning, drying, etc. Includes two nozzles: standard safety style nozzle tip and a high pressure nozzle tip Use with any air compressor and hose |
| 038-0014CT Inflation Kit, 5 pc Use with any air compressor and hose |
| P010-0036SP Powermate Px Pro Multi-Purpose Spray Gun Soft-touch grip for firm hold and reduced vibration Adjustable integrated air adjustment knob to provide more control Easy-to-identify laser etched knobs for air, fluid & pattern controls shows user how to control the pattern – laser etching will not rub off |
| P010-0037SP Powermate Px Pro HVLP Gravity Feed Spray Gun Integrated air adjustment knob to provide more control Laser etching on the control knobs to show increase/decrease – laser etching will not rub off Gravity feed gun minimizes paint usage and simplifies tool clean-up |
| P024-0098SP 3/8" Air Ratchet Wrench Perfect for removing and tightening nuts and bolts, engine and radiator maintenance 60 ft/lbs. maximum torque @ 90 PSI 160 RPM free rotational speed |
| P024-0099SP Powermate Px Pro 1/2 in. Air Impact Wrench Soft-touch boot and grip for firm hold and reduced vibration Addition of boot cover positions this tool at a higher level in the professional category Ball bearing mounted air motor designed for long life, smooth operation |
| P024-0101SP 1/4" Air Die Grinder Perfect for grinding, deburring, smoothing, sharpening, honing Includes 1/4" collet and collet wrenches 25,000 RPM free rotational speed |
| P024-0138SP Grinding Stone Set 5 pc Great for detail work on wood, metal, and other surfaces 1/4" shank on all Use with Powermate Air Die Grinders 024-0078CT, 024-0078SP and P024-0101SP |
| P024-0252SP Powermate Px Pro 1/2 in. Composite Impact Wrench Soft-touch grip for firm hold and reduced vibration Ball bearing mounted air motor designed for long life, smooth operation Easy access torque control allows variable torque adjustments with forward and reverse settings |
| P024-0253SP Powermate Px Pro 3/4 in. Impact Wrench Soft-touch grip for firm hold and reduced vibration Alternative exhaust direction either front or both front & handle provides the user options for the application Easy access torque control allows variable torque adjustments with forward and reverse settings |
| P024-0292SP Powermate Px Pro Right Angle Die Grinder Safety-lock trigger prevents accidental start-up Angled head allows access in tight areas Ball bearing mounted air motor |
| P024-0293SP Powermate Px Pro Heavy Duty Air Hammer Soft-touch grip for firm hold and reduced vibration Professional touch trigger adds comfort and gives user better start/stop control Handle exhaust keeps heat away from work surface |
| P024-0295SP Powermate Px Pro Compact 1/2 in. Air Impact Wrench 6 torque settings up to 400 ft/lbs. 3 piece body style suits the professional user Soft touch grip for firm hold and reduced vibration |
| P024-0303SP Powermate Px Pro 3/8 in. Ratchet Wrench Pin clutch impact mechanism to eliminate kick-back Front exhaust directs air away from user Easy access forward/reverse selector |
| P024-0375SP Heavy Duty Digital Tire Inflator Back-lit LCD screen that is easy to read and works off of 2-AAA batteries(included) Working temperature range: -20 degrees F to 120 degrees F Air and nitrogen compatible |